✖

Electrical Maintenance - SI-1003-59   Openings: 2

Harish consultancy   Chennai   ₹20000 - ₹23000

Work Experience: 1-4 Years

  • Preventive and breakdown maintenance of plant electrical systems

  • CNC machine electrical maintenance

  • LT / HT panel and MCC panel maintenance

  • Control panel wiring and troubleshooting

  • Motor, pump, and compressor electrical maintenance

  • PLC basic fault finding

  • Replace contactors, relays, MCB, sensors, cables

CNC Setter cum Operator - PR-0211-106   Openings: 15

Harish consultancy   Chennai   ₹15000 - ₹25000

Work Experience: 0-5 Years

Skills: Proven experience as a CNC Setter Ability to read and understand technical drawings Knowledge of CNC controls (e.g. Fanuc, Siemens, Heidenhain – specify if needed) Strong understanding of tooling, feeds, speeds, and materials Experience with inspection tools (micrometers, verniers, gauges, CMM awareness) Good attention to detail and problem-solving skills

  • Set and prove CNC machines (lathe/mill/turning/machining centre as applicable)

  • Load and adjust programs, tooling, and offsets

  • Interpret engineering drawings and work instructions

  • Conduct first-off and in-process inspections using measuring equipment

  • Make minor program edits at the machine (where required)

  • Monitor machine performance and troubleshoot basic issues

  • Ensure quality standards, tolerances, and production targets are met

  • Maintain a clean and safe working environment

  • Liaise with operators, engineers, and supervisors as needed

CNC Turning Operator - PR-0211-105   Openings: 2

Harish consultancy   ₹18000 - ₹20000

Work Experience: 2-4 Years

  • Manual Programming Experience Required

  • knowledge for G-codes and M-codes

  • Setting tools, offsets, and job setup

  • Ability to read and understand engineering drawings

  • Responsible for first-piece inspection and in-process quality checks

  • Basic knowledge of measuring instruments (vernier, micrometer, gauge and etc..)


  • Responsible for machine cleanliness and basic maintenance

CNC Setter - PR-0207-104   Openings: 3

Harish consultancy   Chennai   ₹25000 - ₹27000

Work Experience: 3-5 Years

Job Summary

We are looking for an experienced CNC Setter to set up and prepare CNC machines for production, ensuring components are produced accurately, safely, and efficiently to specification.

Key Responsibilities

  • Set and prove CNC machines (lathe/mill/turning/machining centre as applicable)

  • Load and adjust programs, tooling, and offsets

  • Interpret engineering drawings and work instructions

  • Conduct first-off and in-process inspections using measuring equipment

  • Make minor program edits at the machine (where required)

  • Monitor machine performance and troubleshoot basic issues

  • Ensure quality standards, tolerances, and production targets are met

  • Maintain a clean and safe working environment

  • Liaise with operators, engineers, and supervisors as needed

Requirements & Experience

  • Proven experience as a CNC Setter

  • Ability to read and understand technical drawings

  • Knowledge of CNC controls (e.g. Fanuc, Siemens, Heidenhain – specify if needed)

  • Strong understanding of tooling, feeds, speeds, and materials

  • Experience with inspection tools (micrometers, verniers, gauges, CMM awareness)

  • Good attention to detail and problem-solving skills

Mechanical Design Engineer - PR-0203-103   Openings: 1

Harish consultancy   ₹35000 - ₹45000

Work Experience: 1-3 Years

Skills: ASHRAE & NFPA standard knowledge Understanding of PUE, redundancy (N/N+1/2N) Mechanical equipment selection & BMS coordination, COMMUNICATION SKILL

1. Design of different types of cooling system  inclusive of:


  • chilled water system,

  • Immersion cooling,

  • Hot cold aisle containment,

  • Computer room air conditioning (CRAC),

  • Computer room air handler (CRAH) )
  •  

2. Generation of system designs, piping and ducting designs  


3. Design of Fire Protection  systems for different areas within a data center


4. Develop mechanical plantrooms layout with distribution system, equipment , maintenance space for different performance



  • Chilled water plantroom (for different data hall capacity)

  • Water pumproom

  • Fire pump room (for different building heights)

  • Fan wall unit (based on equipment catalogue?)


5. Incorporate redundancy for cooling systems

  •  

Electrical Design Engineer - PR-0203-102   Openings: 2

Harish consultancy   Chennai   ₹35000 - ₹45000

Work Experience: 1-3 Years

Skills: ELV SYSTEMS, POWER DISTRIBUTION SYSTEM, DATA CENTRE FOR ELECTRICAL PLANT LAYOUT, Communication skills.

1. Design of electrical system and extra low voltage system for data centres of various capacities inclusive of:
 

  • Power distribution system
     
  • Telecom
       
  • Information Communication Technology
     
  • Security (including CCTV)
        
  • Public Address System
     
  • Emergency voice communication system

2. Application of electrical system in data halls for different types of rooms (main corridor, genset gantry, data halls, fan wall room).


3. Incorporate different electrical distribution system (bus duct, cable ladder, cable tray, cable trunking, conduits, basket) and its respective capacity.


4. Incorporate different redundancy for electrical distribution systems based on project specs.


5. Develop electrical plantroom layout with distribution system, equipment, maintenance space, termination etc).


6. Develop electrical riser distribution system for different types of floors.


7. Develop quantity of generators required for data centre capacities.


8. Experience with server rack layouts and selection based on required DC performance.


9. In depth knowledge of general electrical design codes, tier systems, and regulations for Data centers.





  •  

 

 

 

 

 

 

VTL and CNC Operator - PR-0202-101   Openings: 4

Harish consultancy   ₹30000 - ₹35000

Work Experience: 3-5 Years

Skills: 1. Experience in heavy engineering / precision machining / fabrication industry 2. understanding of CNC troubleshooting and minor corrections 3. Supplier quality management and vendor audits. 4. Cost of quality analysis and process optimization 5. Experience working in an API environment is a significant advantage.


Hands-on experience with HMC (Horizontal Milling Centre) & HBM (Horizontal Boring Machine) - 3 Axis or 5 Axis.


Familiarity with G codes and M codes.

Strong knowledge of tool selection, offsets, job fixing, and centering.
 

Ability to read and interpret engineering drawings accurately.

Proficiency in using inspection and measuring instruments.


Responsible for daily machine maintenance and record-keeping.




 

Maintenance Assistant Manager - PR-0202-100   Openings: 1

Harish consultancy   Chennai   ₹100000 - ₹120000

Work Experience: 5-7 Years

Skills: Experience with SCADA systems Exposure to TPM / Autonomous Maintenance / 5S practices Knowledge of hydraulic and pneumatic systems Experience in manufacturing or heavy engineering industries Vendor coordination for spares, AMC, and service support


  • Oversee the maintenance (Breakdown & Preventive) of CNC machines (Turning, VMC, HMC, Turn Mill), PLC systems, and SCADA control systems.

  • Develop and execute robust preventive maintenance programs to ensure machine reliability.

  • Resolve technical issues promptly to minimize downtime and ensure continuous production

  • Coordinate with production teams for scheduling and provide technical training/support to maintenance staff.

  • Maintain detailed maintenance records and ensure strict adherence to safety regulations.

Vendor Asst Manager - PR-0131-99   Openings: 2

Harish consultancy   Chennai   ₹80000 - ₹100000

Work Experience: 6-10 Years

Skills: Strong knowledge of hydraulic cylinders and components. Understanding of machining, honing, grinding, welding, heat treatment, and surface finishing Rubber & Plastic Commodity Etc. Ability to read and interpret engineering drawings and GD&T. Knowledge of ISO / IATF quality systems (preferred).

Vendor Identification & Development

  • Identify and onboard vendors for hydraulic cylinder parts such as Metal parts like tubes, rods, Sheets, aluminium parts, seals, end caps, forgings, and machined components Etc.
  • Develop new vendors based on technical capability, capacity, quality systems, and cost
  • Conduct vendor capability and feasibility studies

Supplier Evaluation, Audits & Costing.

  • Perform supplier audits (process, quality, capacity, and compliance)
  • Evaluate vendors on quality, cost, delivery, and service (QCD) parameters
  • Support vendor qualification, approval, and rating systems
  • Analyse part costing, negotiate prices, and drive cost reduction initiatives
  • Support sourcing decisions and RFQs for new and existing parts
  • Work closely with Purchase and Finance teams on commercial finalization

Quality & Process Improvement

  • Ensure vendors meet quality standards and drawing specifications
  • Support PPAP / APQP / FAI activities where applicable
  • Drive corrective and preventive actions (CAPA) at vendor end
  • Reduce rejection, rework, and warranty issues

Coordination & Supply Chain Support

  • Coordinate with Design, Quality, Production, and Purchase teams
  • Ensure timely development of parts for new product launches
  • Monitor vendor delivery performance and resolve supply issues

QA Manager - PR-0124-98   Openings: 2

Harish consultancy   ₹100000 - ₹150000

Work Experience: 10-12 Years

Skills: 1. Strong knowledge of Quality Management Systems. 2. ISO 9001 / API Q1 implementation & maintenance. 3. Internal & external audit management. 4. Root Cause Analysis (RCA) and Corrective & Preventive Actions (CAPA) 5. Cross-functional coordination with production, engineering, and supply chain. 6. Quality documentation control. 7. Leadership & people management skills (team handling, performance reviews)

1. Define, deploy, and monitor QMS processes across departments.Coordinate with teams to design and implement QMS procedures.


2. Conduct training on ISO 9001/API Q1, product specifications, and customer standards to ensure compliance and quality assurance awareness.


3. Maintain accurate QMS documentation (manuals, procedures, records) to demonstrate compliance with ISO 9001/API standards.


4.b Manage the Quality Department, including budgeting, staffing decisions, and employee performance reviews.


5. Serve as the primary point of contact for external stakeholders (customers/suppliers) regarding quality issues or complaints.


6. Analyze quality data to drive process enhancements, implement corrective actions, and promote a culture of quality.


7. Prepare and present data/improvement recommendations during management review meetings.


8. Ensure the organization meets all customer and compliance requirements.

Accountant - PR-0121-97   Openings: 1

Harish consultancy   Chennai   ₹23000 - ₹25000

Work Experience: 3-7 Years

  • Handle bank reconciliation independently

  • Perform Tally entry and GST filing

  • Prepare and finalize balance sheets, Conduct auditing and account finalization

  • Manage mail formatting and correspondence

  • (Desirable) Prior experience in the logistics industry

  • Required Skills Proficient in Tamil, English

  • Strong knowledge of Microsoft Office and accounting software

VMC Machine Operator - PR-0112-96   Openings: 3

Harish consultancy   Chennai   ₹24000 - ₹25000

Work Experience: 2-5 Years

Skills: Knowledge of VMC machine operation. Basic CNC programming understanding (G & M codes). Drawing reading skills. Measuring instruments knowledge

  • Load and unload components safely. 
  • Set tools, offsets, and fixtures as per drawing.
  • Measure components using vernier, micrometer, gauges. 
  • achine troubleshooting and tool change. 
  • Read and understand engineering drawings.

PPC - PR-0110-95   Openings: 1

Harish consultancy   Chennai   ₹18000 - ₹22000

Work Experience: 1-3 Years

  • Prepare production plans and schedules
  • Monitor daily, weekly, and monthly production
  • Coordinate with production, stores, purchase, and quality teams
    * Ensure on-time delivery of products
  • Track material availability and raise material requisitions

  • Maintain production records and reports

  • Analyze production delays and suggest improvements

  • Support inventory control and minimize wastage

  • Follow safety and quality standards

Quality Controller - SI-0102-94   Openings: 5

Harish consultancy   Chennai   ₹15000 - ₹24000

Work Experience: 1-3 Years

Forklift Operator - SI-1230-90   Openings: 1

Harish consultancy   Tamil Nadu   ₹15000 - ₹20000

Work Experience: 1-2 Years

  • Operate forklifts and other warehouse equipment safely and efficiently.

  • Load, unload, and move materials within the warehouse or production area.

  • Ensure proper stacking, storage, and placement of materials.

  • Conduct daily inspection of forklifts and report any maintenance issues.

  • Maintain cleanliness and organization in the warehouse.

  • Follow safety protocols and adhere to company policies.

  • Assist in inventory checks and documentation of stock movement.

CNC programmer - SI-1211-89   Openings: 1

Harish consultancy   Chennai   ₹30000 - ₹55000

Work Experience: 10-15 Years

Service Executive - PR-1210-86   Openings: 5

Harish consultancy   Chennai   ₹15000 - ₹16000

Work Experience: 0-2 Years

Skills: Strong customer service orientation. Ability to handle multiple tasks and work under pressure. Problem-solving and conflict resolution skills.

  • Greet and assist customers visiting the showroom in a friendly and professional manner.

  • Provide detailed information on products, services, and promotions.

  • Manage service bookings, follow-ups, and schedule appointments efficiently.

  • Handle customer queries, complaints, and feedback, ensuring timely resolution.

  • Maintain showroom presentation and ensure a clean, organized, and welcoming environment.

  • Coordinate with service technicians, sales staff, and other departments to ensure smooth operations.

  • Maintain records of customer interactions, service reports, and follow-up actions.

  • Upsell and cross-sell additional services or products to enhance customer satisfaction and revenue.

  • Stay updated on company products, services, and industry trends.

Sales Executive - PR-1210-85   Openings: 5

Harish consultancy   Chennai   ₹15000 - ₹16000

Work Experience: 0-2 Years

  • Greet and assist customers visiting the showroom with a friendly, professional attitude.

  • Understand customer requirements and recommend suitable products.

  • Demonstrate product features, specifications, and benefits clearly and effectively.

  • Achieve daily, weekly, and monthly sales targets.

  • Maintain an organized and visually appealing showroom layout and product displays.

  • Handle customer queries, provide product information, and follow up on leads.

  • Prepare sales invoices, process payments, and manage basic documentation.

  • Stay updated on product knowledge, pricing, promotions, and stock levels.

  • Coordinate with inventory and supply teams to ensure product availability.

  • Build long-term relationships with customers to encourage repeat business.

  • Address and resolve customer concerns promptly to ensure high satisfaction.

Admin Executive - PR-1208-84   Openings: 1

Harish consultancy   Chennai   ₹20000 - ₹25000

Work Experience: 1-3 Years

  • Manage office supplies, maintenance, and housekeeping.

  • Handle calls, emails, correspondence, and visitor management.

  • Support scheduling, travel arrangements, and meeting coordination.

  • Maintain records, files, and documentation.

  • Assist with vendor management and procurement.

  • Provide administrative support to HR and other departments.

Chrome Plating Operator - PR-1206-83   Openings: 1

Harish consultancy   Chennai   ₹20000 - ₹25000

Work Experience: 2-5 Years

Operate chrome plating machines and follow SOPs.

 

Prepare parts for plating and inspect finished items for quality.

 

Monitor plating conditions and maintain chemical levels.

 

Keep the plating area clean and follow all safety guidelines.

 

Record daily production and report any issues.

Senior Production Engineer - SI-1204-82   Openings: 3

Harish consultancy   Chennai   ₹35000 - ₹60000

Work Experience: 10-15 Years

JOB DESCRIPTION – STANDARD TEMPLATE

DETAILS

Position & Department: Sr. Production Engineer, Production Department

Contact Person: Sandhya Srinivas

Residence Location: within a radius of max of 30 kms

Annual Salary/CTC: 6 LPA

Experience: Minimum 10 years

Employment Type:Full-time, Permanent

Expected to joining/Notice Period: 15 to 30 days

General shift but he/she has to ensure production department has supervisors for shifts else they have to come on rotational shifts.

Number of Domain/Functional Interview Round(s): 2-3

Number of HR Interview Round(s): 1

BRIEF COMPANY OVERVIEW

Bellows manufactures bellows, expansion joints, hoses, and piping accessories. The company designs these products using EJMA, ASME & FSA standards. They serve all process industries, including power, nuclear, steel, oil & gas in India and overseas in India and Overseas and are ASME Code Stamped, IBR approved, and PED compliant.

ROLE AND RESPONSIBILITIES

  • Plan for and oversee the manufacturing of a project until its dispatch within a set timeline.
  • Estimate and indent materials for projects.
  • Estimate job-wise manpower for projects.
  • Ensure optimal use of man, material, and machine.
  • Develop cutting plans for processing raw materials.
  • Generate daily work assignments with expected results that are defined and monitored.
  • Supervise individual operations on the shop floor, such as shearing, welding, forming, testing, and painting.
  • Control issued materials by marking individual parts, sub-assemblies, and the final product.
  • Visit customer installations to solve issues or install products when required.

EDUCATION & QUALIFICATIONS

  • Diploma in Mechanical Engineering or B.Tech/B.E/M.E. in Mechanical Engineering.

Must-Have Skills:

  • Knowledge of reading engineering drawings and abilityto perform hand calculations (empirical) involving principles of Mechanical Engineering.

  • Knowledge of manufacturing technology involving fabrication and welding of thin stainless steel metal/pressure part manufacturing.

  • Manpower planning, handling and measuring outputs.

  • Material planning.

  • Effective managerial and supervisory skills.

Nice-to-Have Skills:

  • Pressure vessel/part industry – Heat exchangers, Tanks, Conveyors, boiler industry experience

  • Specific NDT (Non-Destructive Testing) or welding certifications.

  • Certifications and ability to conduct safety workshops.

IDEAL CANDIDATE PROFILE & PREFERENCES

  • Good communication skill in English, Tamil and Hindi

  • Staying within a maximum radius of 25-30 kms from factory

PERKS & BENEFITS

  • Medical insurance (for Self) and Group Accident Policy after 3 months of working

  • Provident Fund if applicable

  • Gratuity as per the laws

  • Leave accrual as per company policy

  • Canteen facility

Logistics Executive - PR-1204-81   Openings: 1

Harish consultancy   Chennai   ₹20000 - ₹25000

Work Experience: 1-4 Years

Skills: Inventory Management, Stock Checking & Updating, Transport Coordination, Material Handling, Warehouse Operations, Dispatch & Delivery Management, Documentation (Invoice, DC, Packing List), ERP / SAP / Tally, MS Excel (VLOOKUP, Pivot, Basic formulas).

  • Coordinate daily logistics operations such as inbound and outbound shipments.
  • Arrange transportation, tracking, and delivery of goods on time.
  • Maintain stock levels and update inventory records regularly.
  • Prepare dispatch documents like invoices, delivery challans, and packing lists.
  • Communicate with suppliers, transporters, and internal teams for smooth operations.
  • Monitor warehouse activities and ensure proper storage of materials.
  • Handle customer queries related to shipment status and delivery issues.
  • Ensure all logistics activities follow company policies and safety standards.
  • Maintain data in ERP / Excel and prepare daily / weekly reports.

Tracking Executive - SA-1201-80   Openings: 2

Harish consultancy   Tamil Nadu   ₹18000 - ₹25000

Work Experience: 3-5 Years

  • Monitor and track shipments for dispatch and onboard logistics.

  • Prepare and manage outboard documentation and reservations.

  • Maintain up-to-date status on all cargo movements.

Ensure proper reservation and logistics documentation procedures are followed
Experience in a logistics-oriented company is highly preferred.

  • Knowledge of dispatch, onboard operations, and documentation processes.

  • Proficiency in reservation and documentation for outbound shipments.

  • Good communication skills in Hindi is a must.

BIM Engineer - PR-1125-79   Openings: 1

Harish consultancy   Chengalpattu   ₹30000 - ₹35000

Work Experience: 1-3 Years

Skills: Revit (MEP), AutoCAD, and basic engineering design knowledge.

  • Create detailed 3D MEP models and 2D drawings using Revit and AutoCAD.
  • Ensure compliance with BIM standards and project BEP.
  • Coordinate with architectural, structural, and civil teams for model integration.
  • Perform clash detection (Navisworks) and resolve coordination issues.
  • Update models based on design changes and revisions.
  • Work flexible hours to meet project deadlines.

Quality Controller - SI-0731-37   Openings: 3

Harish consultancy   Chennai   ₹15000 - ₹18000

Work Experience: 0-1 Years

Skills: Soldering, PCB Board, Testing, Panel Wiring.

  • Inspect and verify electrical panels, wiring, circuits, and systems.

  • Perform quality checks on raw materials and finished electrical products.

  • Conduct routine testing using instruments like multimeters, insulation testers, etc.

  • Ensure adherence to safety and electrical quality standards (BIS, IEC, etc.).

  • Report non-conformities and assist in root cause analysis and corrective actions.

  • Maintain accurate documentation and inspection records.

  • Coordinate with production, design, and maintenance teams for quality improvements.

  • Participate in audits and continuous improvement initiatives.

  • Monitor compliance with project drawings, electrical codes, and customer specifications.

Accountant - PR-1122-77   Openings: 1

Harish consultancy   ₹25000 - ₹30000

Work Experience: 5-7 Years

Skills: GST, MS Office, Tally

  • Handle bank reconciliation independently

  • Perform Tally entry and GST filing

  • Prepare and finalize balance sheets, Conduct auditing and account finalization

  • Manage mail formatting and correspondence

  • (Desirable) Prior experience in the logistics industry

  • Required Skills Proficient in Tamil, English

  • Strong knowledge of Microsoft Office and accounting software



Quality Manager - SI-1121-76   Openings: 1

Harish consultancy   Hosur   ₹60000 - ₹70000

Work Experience: 12-15 Years

    To read the drawing
 


•    To read the GDT 
    

To check the instrument & Gauges properly 


•    High Gauge, Vernier, Micrometer, Gauges


•    To maintain the quality documents (Setting, Self report)


•    To prepare the setting report & give the approval by self


•    Maintain IATF & ISO audit documents

Quality Manager - SI-1115-75   Openings: 1

Harish consultancy   Chennai   ₹45000 - ₹70000

Work Experience: 8-10 Years

Job Description


Responsible for ensuring the quality of products, processes, and systems. Key roles and responsibilities include:


1. Quality Policy and Objectives: Develop, implement, and maintain quality policies and objectives.


2. Quality Management System (QMS): Establish, maintain, and improve the QMS, including ISO 9001 certification.


3. Quality Planning: Develop quality plans, procedures, and work instructions.


4. Quality Control: Implement and oversee quality control processes, including inspections and testing.


5. Quality Assurance: Ensure compliance with quality standards, regulations, and customer requirements.


6. Audits and Assessments: Conduct internal audits, assessments, and continuous improvement initiatives.


7. Corrective Action and Preventive Action (CAPA): Investigate, analyze, and resolve quality issues, implementing corrective and preventive actions.


8. Supplier Quality Management: Evaluate, approve, and monitor suppliers, ensuring their quality performance meets requirements.


9. Training and Awareness: Provide quality training, awareness, and communication to employees.


10. Continuous Improvement: Foster a culture of continuous improvement, encouraging employee involvement and innovation.


11. Quality Metrics and Reporting: Establish, track, and report quality metrics, including key performance indicators (KPIs).


12. Customer Satisfaction: Monitor and improve customer satisfaction through quality performance and communication.


13. Regulatory Compliance: Ensure compliance with relevant regulations, standards, and industry requirements.


14. Document Control: Maintain accurate, up-to-date quality documentation and records.


15. Quality Team Management: Lead, guide, and develop the quality team, ensuring effective quality performance.

Pump Assembly - SA-1114-74   Openings: 5

Harish consultancy   Tamil Nadu   ₹15000 - ₹20000

Work Experience: 1-2 Years

Store keeper - SA-1113-73   Openings: 1

Harish consultancy   Chennai, Chengalpattu, Kanchipuram   ₹15000 - ₹18000

Work Experience: 1-1.5 Years

  • Assist the Store Keeper in daily store operations.

  • Help in receiving, unloading, and arranging incoming materials properly.

  • Support in packing and dispatching materials as per instructions.

  • Maintain cleanliness and orderliness in the store area.

  • Label and tag items correctly for easy identification.

  • Help in physical stock verification and counting.

  • Assist in loading and unloading materials safely.

  • Follow safety rules and ensure proper material handling.

  • Report shortages or damaged goods to the Store Keeper immediately.

Cnc operator - SA-1108-72   Openings: 3

Harish consultancy   Tamil Nadu   ₹15000 - ₹20000

Work Experience: 1-5 Years

Robotic Programmer - SA-1107-71   Openings: 1

Harish consultancy   Chennai, Chengalpattu   ₹30000 - ₹45000

Work Experience: 3-5 Years

  • Develop and modify robot programs for applications such as welding, pick-and-place, assembly, and material handling.

  • Configure and integrate robots with PLCs, vision systems, and other automation equipment.

  • Perform robot path programming, calibration, and cycle-time optimization.

  • Conduct testing, troubleshooting, and debugging of robotic systems.

  • Support installation and commissioning at customer sites.

  • Maintain documentation for robot programs, wiring, and configuration.

  • Collaborate with design, electrical, and mechanical teams for project implementation.

  •  

Quality Management System - SA-1107-70   Openings: 1

Harish consultancy   Chennai, Chengalpattu, Kanchipuram   ₹30000 - ₹35000

Work Experience: 3-5 Years

Purchase Executive - SA-1103-69   Openings: 1

Harish consultancy   Tamil Nadu   ₹15000 - ₹25000

Work Experience: 1-5 Years

ERP executive - SA-1101-68   Openings: 1

Harish consultancy   Tamil Nadu   ₹15000 - ₹20000

Work Experience: 1-2 Years

Billing Accountant - SA-1101-67   Openings: 2

Harish consultancy   Tamil Nadu   ₹15000 - ₹25000

Work Experience: 1-3 Years

The Billing Executive will be responsible for preparing, verifying, and maintaining all customer billing and invoice records. The role ensures accurate financial documentation, timely invoice generation, and coordination with clients and internal teams for smooth billing operations.

service Engineer - SA-1028-66   Openings: 10

Harish consultancy   Chennai, Chengalpattu   ₹15000 - ₹35000

Work Experience: 1-5 Years

  • Perform installation, commissioning, and maintenance of equipment/machines at client sites.

  • Diagnose and troubleshoot technical issues on-site and provide timely resolutions.

  • Conduct regular preventive maintenance and service checks.

  • Coordinate with customers to understand service requirements and provide support.

  • Maintain service reports, documentation, and customer feedback records.

  • Ensure adherence to safety standards and company service protocols.

  • Support the sales and project teams with technical inputs when required.

Purchase Head - SI-1025-65   Openings: 1

Harish consultancy   Chennai   ₹15 lpa - ₹25 lpa

Work Experience: 15-25 Years

STORES OFFICER - PR-1024-64   Openings: 1

Harish consultancy   Chennai   ₹40000 - ₹50000

Work Experience: 5-6 Years

Skills: Tally and MS office

  • Ensure security and proper storage of all materials.

  • Maintain cleanliness and proper labeling of storage areas and materials.

  • Keep accurate records of receipts, issues, and stock balances.

  • Issue materials only against authorized requests (MRS/Job Orders).

  • Conduct physical stock verification at least twice a year.

  • Report any missing materials or discrepancies immediately to management.

  • Submit monthly stock statements by the 5th of every month.

  • Maintain adequate stock levels of consumables to prevent production delays.

  • Coordinate with Purchase to ensure timely availability of materials.

  • Provide accurate inventory data to avoid over-purchasing.

Senior Dispatch Executive - PR-1024-63   Openings: 1

Harish consultancy   Chengalpattu   ₹35000 - ₹40000

Work Experience: 4-7 Years

Skills: SAP ERP MS Excel

  • Plan and manage end-to-end dispatch activities to ensure timely delivery of materials as per customer requirements.
  • Coordinate effectively with production, stores, and logistics teams to align dispatch schedules.
  • Prepare and verify all dispatch-related documents such as invoices, packing lists, e-way bills, and delivery challans.
  • Supervise loading and unloading operations to ensure accuracy, safety, and compliance with company standards.
  • Liaise with transporters, logistics partners, and customers for vehicle arrangements, tracking, and delivery updates.
  • Monitor dispatch movement through ERP systems and maintain accurate dispatch MIS reports.
  • Optimize logistics and route planning to minimize cost and improve efficiency.
  • Handle inventory control activities and support stock audits and reconciliation.
  • Ensure adherence to safety, compliance, and quality policies throughout the dispatch process.
     

Store Incharge - PR-1015-62   Openings: 1

Harish consultancy   Chennai   ₹14000 - ₹16000

Work Experience: 0-1 Years

  • Basic knowledge of stock/inventory management

  • Willingness to learn and follow procedures

  • Good organizational and time management skills

  • Basic computer knowledge (MS Excel, Word)

  • Ability to work in a team and under supervision

National Sales Manager - SI-1004-61   Openings: 3

Harish consultancy   Chennai   ₹15 lpa - ₹25 lpa

Work Experience: 15-20 Years

Laser Welding Operator - SI-1003-60   Openings: 2

Harish consultancy   Chennai   ₹13000 - ₹15000

Work Experience: 0-2 Years

Laser Welder - SA-0915-58   Openings: 2

Harish consultancy   Tamil Nadu  

Teacher - SA-0911-57   Openings: 1

Harish consultancy   Chennai   ₹9000 - ₹10000

Work Experience: 1-2 Years

Bachelor’s degree .

1–2 years of teaching experience.

Good communication and classroom management skills.

Passion for teaching and mentoring students.

R & D Juniot Engineer - SI-0904-56   Openings: 2

Harish consultancy   Chennai   ₹25000 - ₹35000

Work Experience: 2-5 Years

Skills: hydraulic cylinders, valves, and pumps. The ideal candidate will be highly proficient in SolidWorks (2D & 3D modeling) and skilled in developing design BOMs, DFMEA, and NPD activities.

Junior Engineer (R&D)

We are seeking an experienced Junior Engineer  – R&D with 3 to 4 years of expertise in product design and development, particularly in hydraulic cylinders, valves, and pumps. The ideal candidate will be highly proficient in SolidWorks (2D & 3D modeling) and skilled in developing design BOMs, DFMEA, and NPD activities.

The role requires strong knowledge of manufacturing processes including machining, welding, stamping, electroplating, painting, and assembly, along with proven experience in process development and optimization. Candidates should be adept at prototyping, functional testing, and validation, with hands-on experience in test benches, jigs, and fixtures.

A solid background in APQP, PPAP documentation, field testing, and product application analysis is essential. The position also demands on-site field support for validation and troubleshooting in applications such as trucks and mining.

The successful candidate will possess strong leadership, communication, and cross-functional collaboration skills to drive innovation and deliver high-quality engineering solutions.

R&D Assistant Manager - SI-0904-55   Openings: 2

Harish consultancy   Chennai   ₹30000 - ₹40000

Assistant Manager (R&D)

We are seeking an experienced Assistant Manager – R&D with 8–10 years of expertise in product design and development, particularly in hydraulic cylinders, valves, and pumps. The ideal candidate will be highly proficient in SolidWorks (2D & 3D modeling) and skilled in developing design BOMs, DFMEA, and NPD activities.

The role requires strong knowledge of manufacturing processes including machining, welding, stamping, electroplating, painting, and assembly, along with proven experience in process development and optimization. Candidates should be adept at prototyping, functional testing, and validation, with hands-on experience in test benches, jigs, and fixtures.

A solid background in APQP, PPAP documentation, field testing, and product application analysis is essential. The position also demands on-site field support for validation and troubleshooting in applications such as trucks and mining.

The successful candidate will possess strong leadership, communication, and cross-functional collaboration skills to drive innovation and deliver high-quality engineering solutions.

Welder - PR-0826-54   Openings: 1

Harish consultancy   Chennai   ₹25000 - ₹30000

Work Experience: 3-5 Years

Skills: Mig, Tig and Arc welder

  • Read and interpret blueprints, technical drawings, and specifications.

  • Operate welding equipment including MIG, TIG, Stick (SMAW), and Flux-Cored Arc Welding (FCAW).

  • Inspect and prepare materials for welding.

  • Perform welding processes on a variety of materials such as steel, aluminum, and stainless steel.

  • Conduct quality checks to ensure precision and adherence to standards.

  • Maintain tools and equipment in good working condition.

  • Follow all safety protocols and maintain a clean work environment.

  • Collaborate with other team members to complete tasks efficiently and accurately.

  • Perform grinding, cutting, and finishing tasks as required.

Automation Operator - SI-0820-50   Openings: 5

Harish consultancy   Chennai   ₹14000 - ₹15000

Work Experience: 0-1 Years

Job Title: Automation Operator
Location: Oragadam, Chennai (On-site)

Key Responsibilities:

  • Operate robotic and automated machinery (die-casting, assembly, handling systems)

  • Perform routine maintenance and troubleshooting

  • Assist in production tasks (loading/unloading, inspection, deburring)

  • Monitor system performance and ensure quality standards

  • Maintain documentation and adhere to safety norms

Qualifications:

  • ITI/Diploma/Graduate in relevant engineering field

  • Fresher to one years of experience in automation or robotics

  • Familiarity with robotic systems, PLC basics, inspection tools

Compensation & Perks:

  • ₹14,000–₹15,000/month

  • Rotational or day shifts

  • Benefits: PF, medical, meals, performance incentives

customer support exicutive - NA-0813-48   Openings: 1

Harish consultancy   Chennai   ₹17000 - ₹18000

Work Experience: 1-2 Years

Skills: Speaking in Hindi and English.

We are looking for a Customer Support Executive to manage customer queries and complaints. You will also be asked to process orders, modifications, and escalate complaints across several communication channels. A successful candidate will be patient, empathetic, and passionately communicative.

Quality Controller - NA-0812-47   Openings: 3

Harish consultancy   Chennai   ₹18000 - ₹20000

Work Experience: 1-2 Years

Skills: Knowledge of Quality Standards, Documentation, Measurement and Inspection.

  • Inspect raw materials, in-process production, and finished goods to ensure they meet quality standards.
  • Document inspection outcomes by completing detailed reports and logs.
  • Perform regular quality assessments on all incoming materials from vendors and outgoing products.
  • Recommend improvements to the production process to ensure quality control.
  • Maintain and calibrate testing equipment.
  • Ensure compliance with company policies, industry standards, and regulatory requirements
  • Handle and operate quality testing instruments
  • Record, analyze, and report inspection results.
  • Work closely with production and warehouse teams to ensure quality standards are upheld throughout the supply chain.

center manager - NA-0812-46   Openings: 1

Harish consultancy   Chennai   ₹25000 - ₹25000

Work Experience: 2-3 Years

The Center Head will be responsible for managing daily operations of the education center, ensuring high levels of student satisfaction, meeting enrollment targets, and maintaining academic quality and operational efficiency.

Siemens PLC Programming - NA-0807-45   Openings: 1

Harish consultancy   Chennai   ₹55000 - ₹60000

Work Experience: 1-2 Years

Skills: Scada/HMI VFD and SERVO Motor Automation Industry

We are seeking a skilled and detail-oriented Siemens PLC Programmer to join our automation team. In this role, you will be responsible for the design, development, programming, and commissioning of PLC-based control systems using Siemens platforms  You will work closely with electrical and mechanical engineers, as well as on-site technicians, to ensure smooth integration of automated systems.

Accounted - NA-0807-44   Openings: 1

Harish consultancy   Chennai   ₹20000 - ₹30000

Work Experience: 2-6 Years

Skills: Tally, Ms office and GST

  • Record day-to-day financial transactions in Tally ERP

  • Manage accounts payable and receivable

  • Reconcile bank statements and ledger accounts

  • Prepare and file GST returns (GSTR-1, GSTR-3B, GSTR-9) on time

  • Match and reconcile GST input credit with GSTR-2A/2B

  • Handle GST notices, refunds, and compliance requirements

  • Generate monthly and yearly financial reports

  • Use MS Excel for data analysis, reports, and reconciliations

  • Support statutory audits and assist with financial documentation

  • Maintain organized and up-to-date financial records

Mechanical Design Engineer - NA-0805-43   Openings: 2

Harish consultancy   Chennai   ₹20000 - ₹30000

Work Experience: 2-4 Years

Skills: Creo, GD&T, jigs, fixtures and tooling, DFM & DFA

  • Design mechanical components and systems using CAD software (e.g., SolidWorks, CATIA, Creo, AutoCAD)

  • Develop 2D drawings and 3D models for manufacturing and assembly

  • Perform design calculations, FEA, and tolerance analysis

  • Collaborate with electrical, manufacturing, and quality teams throughout the product development lifecycle

  • Conduct design reviews and make revisions based on feedback and testing

  • Ensure compliance with industry standards, safety regulations, and quality guidelines

  • Prepare BOMs (Bill of Materials), technical documentation, and assembly instructions

  • Support prototyping, testing, and validation of mechanical designs

  • Identify and implement design improvements for performance, cost, and manufacturability

Finance Executive - NA-0805-42   Openings: 1

Harish consultancy   Chennai   ₹18000 - ₹20000

Work Experience: 1-2 Years

Skills: SAP, ERP systems, MS Office

  • Maintain accurate financial records and ensure timely reporting.

  • Assist in preparing monthly, quarterly, and annual financial statements.

  • Monitor and manage accounts payable and receivable processes.

  • Support the preparation and monitoring of budgets and forecasts.

  • Reconcile bank statements and maintain general ledger accuracy.

  • Assist with internal and external audits.

  • Ensure compliance with all financial regulations and standards.

  • Analyze financial data to identify trends, risks, and opportunities.

  • Work closely with other departments to support operational efficiency.

  • Contribute to process improvements and automation initiatives.

Quality Controller - NA-0802-41   Openings: 2

Harish consultancy   Chengalpattu   ₹20000 - ₹25000

Work Experience: 1-4 Years

Skills: Instrument handling, Knowledge on materials and standards, Communication skills, Quick Learner.

  • Inspect raw materials and finished products to ensure compliance with quality standards and specifications.

  • Conduct routine and non-routine quality checks during the production process.

  • Document inspection results and maintain accurate quality records.

  • Identify and isolate defective products and communicate findings to production or QA teams.

  • Ensure compliance with safety and hygiene regulations (especially in food, pharma, or cleanroom environments).

  • Assist in root cause analysis and implementation of corrective and preventive actions (CAPA).

  • Collaborate with other departments (Production, R&D, Logistics) to resolve quality-related issues.

  • Participate in continuous improvement activities to enhance product quality and operational efficiency.

  • Report and escalate any critical quality deviations or non-conformances to the Quality Manager.

BIM Modeler - SI-0731-39   Openings: 1

Harish consultancy   Chennai   ₹50000 - ₹70000

Work Experience: 5-10 Years

Skills: BIM Software, 3D Modeling & Drafting, Clash Detection & Coordination, Model Documentation & BOQ Extraction

  • Develop precise 3D MEP models using AutoCAD, Revit MEP, and Navisworks
  • Work on LOD 200 to 400 modeling levels
  • Identify and report clashes using Navisworks / Dalux
  • Prepare shop drawings, load calculations, and BOQs
  • Collaborate with the BIM Coordinator for issue resolutionLead BIM execution from modeling to client submission
  • Approve final designs and manage communication with clients
  • Resolve clashes across MEP, structural, and architectural models
  • Maintain quality standards and accurate documentation
  • Train and guide the BIM team on best practices

CNC operator - SI-0628-26   Openings: 15

Harish consultancy   Chennai   ₹15000 - ₹18000

Work Experience: 1-2 Years

Quality Inspector - SI-0709-36   Openings: 50

Harish consultancy   Chennai   ₹14000 - ₹18000

Work Experience: 0-2 Years

Roles and Responsibility - Quality Inspector

PURPOSE OF POSITION  

This individual is to be a technical and administrative member of the Quality team and will    report to the Team Leader –Quality. He will manage within the guidelines set forth by the corporate policy and company business operation procedures. The Quality Inspector will be responsible for Quality Control and work within the guidelines of crown quality system.

RESPONSIBILITES & TASKS 

  1. To ensure 5s activities & Proper PPE’S at shift starting & end as per guidelines.

  2. Allocate to work as per Team Leader Guidelines.

  3. Keep assignment file neat and handle properly & ensure all the necessary documents are available & and fill required documents properly on daily basis.

  4. Review yesterday NC with TL or Engineer & co-operate all the audits (daily / monthly).

  5. Inspection should be as per work instruction & maintain proper cycle time (productivity).
  6. Proper ethics should be followed in our customer / Host location.
  7. To avoid unauthorised leave and permission.
  8. To avoid customer concerns & follow all actions are taken for customer concern.
  9. To support new inspector training.
  10. To improve company image in all the levels of activity in our customer site.
  11. Keep open your thoughts to improve crown organization.
  12. Should Not sign any customer or host document without your supervisor acknowledgment.

  13. Continual improvement activities in Quality control.

Qualifications and skills Required.

  • Edu Qualifications: Min- ITI & Max BE in Mechanical/ Automobile filed.

  •  Exp Required: 0 to 3 years in Automobile Quality Industry 

  • Able to Understand Safety standards & Quality Expectations.

  • Basic Communication skills & Responsible, trustworthy.

Control panel Wiring - SI-0708-35   Openings: 3

Harish consultancy   Chennai   ₹30000 - ₹45000

Work Experience: 2-5 Years

Service Engineer - SI-0703-32   Openings: 10

Harish consultancy   Chennai   ₹14000 - ₹25000

Job Summary:

Looking for a Service Engineer to handle installation, service, repair, and maintenance of electrical products like UPS, Inverters, Stabilizers, and Batteries at customer locations. Candidates must be skilled in fault diagnosis, basic PCB testing, and willing to travel for service calls.

✅ Key Responsibilities:

  • Install and commission UPS, inverter, and stabilizer systems

  • Troubleshoot and repair faults (electrical/PCB level)

  • Perform preventive maintenance and routine service visits

  • Test battery performance, load conditions, and backup time

  • Explain product features and maintenance to customers

  • Maintain service logs, reports, and warranty documentation

? Key Skills Required:

  • Basic Electrical Troubleshooting

  • UPS / Inverter / Stabilizer Knowledge

  • Battery Testing & Maintenance

  • Multimeter, Clamp Meter Usage

  • Customer Communication Skills

  • Time Management

  • Willingness to travel

Fabrication Fitter - SI-0628-31   Openings: 3

Harish consultancy   Chennai   ₹25000 - ₹30000

Work Experience: 2-5 Years

Key Responsibilities:

  • Perform basic fabrication fitting and assembly tasks under supervision

  • Feed woven bags into machines as per process requirements

  • Assist in loading/unloading materials into the furnace safely

  • Support grinding, cutting, and material handling operations

  • Maintain a clean and safe work environment

  • Follow instructions from supervisors and safety guidelines

Key Skills:

  • Basic knowledge of fabrication and fitting tools

  • Familiarity with hot furnace operations and safety protocols

  • Experience in industrial material handling and machine feeding

  • Physically fit and ready for continuous standing/lifting work

Helper - SI-0628-30   Openings: 10

Harish consultancy   Chennai   ₹13000 - ₹16000

Work Experience: 1-2 Years

We are looking for a Factory Helper with hands-on experience in furnace area operations, woven bag feeding, and material grinding work. The candidate must be hardworking, physically fit, and able to support day-to-day production activities.

Key Responsibilities:

  • Assist in furnace loading/unloading and cleaning operations.

  • Handle woven bags feeding into machines as per the process requirement.

  • Operate or support the grinding process (metal, plastic, or scrap as applicable).

  • Maintain cleanliness and safety in the working area.

  • Follow supervisor instructions and production timelines.

  • Support other helper/labour activities when needed (loading/unloading, stacking, etc.)

Key Skills:

  • Basic understanding of furnace and grinding operations

  • Physically fit and willing to work in hot and heavy environments

  • Safety awareness in handling materials and machinery

  • Teamwork and punctuality

Arc Welder - SI-0628-29   Openings: 10

Harish consultancy   Chennai   ₹20000 - ₹25000

Work Experience: 2-4 Years

PLC Programmer - SI-0628-27   Openings: 1

Harish consultancy   Chennai   ₹3 LPA - ₹7 LPA

Work Experience: 3-7 Years

Eligibility to apply:
 

Matriculation academic qualification 

 Graduation: Diploma & BE EEE (TIRE 2 or good colleges)- Regular / distinction / First Class / Second class 

 Years of Experience: 01 to 03 years in control Engineering / PLC programming 

  Rockwell PLC Programmer with basic knowledge in PLC programming 

 HMI (Human Machine interface) basic Knowledge 

 SCADA (Supervisory control and Data Acquisition) basic knowledge 

 Basic Knowledge in Servo (Servomotor) & VFD (Variable Frequency drive)


Other Skills: 

 Communication 

 Leadership 

 Team Work 

 Judgment and Decision Making 

 Analytical Thinking 

 Time Management 

 Commissioning

Fabrication Helper - HA-0325-11   Openings: 2

Harish consultancy   Chennai   ₹15,000 TH - ₹16,500 TH

Work Experience: 0-6 Years

Skills: Buffing & Grainding

  1. The candidate should be willing to work with Fabricated parts.
  2. The candidate will be involved in mechanical works like Drilling, Boring, Buffing & Grinding.
  3. The candidate will be involved in general helping works

HR recruiter - SI-0417-23   Openings: 3

Harish consultancy   Chennai   ₹10000 - ₹13000

utility Maintenance - SI-0327-19   Openings: 1

Harish consultancy   Chennai, Chengalpattu   ₹18000 - ₹25000

Work Experience: 2-4 Years

Mechanical Assembly Engineer - SI-0327-18   Openings: 2

Harish consultancy   Chennai   ₹15000 - ₹25000

Work Experience: 2-4 Years

A Mechanical Assembly Engineer is responsible for assembling, testing, and troubleshooting mechanical components, machinery, and systems. They ensure that all parts are correctly fitted, aligned, and functioning as per design specifications while maintaining quality and safety standards.

VMC Setter Cum Operator - SI-0327-16   Openings: 3

Harish consultancy   Chennai   ₹18000 - ₹25000

Work Experience: 2-3 Years

A VMC (Vertical Machining Center) Setter cum Operator is responsible for setting up and operating CNC-controlled vertical machining centers to manufacture precision components. Their key duties include machine setup, tool selection, program loading, quality inspection, and ensuring smooth production with minimal downtime.

VMC Operaator - HA-0324-1   Openings: 5

Harish consultancy   Chennai   ₹20000 - ₹50000

Work Experience: 2-3 Years

JD

Logistics Executive - HA-0324-8   Openings: 2

Harish consultancy   Tamil Nadu   ₹18,000 TH - ₹22,000 TH

Work Experience: 3-5 Years

Key Responsibilities:


1. Packing & Dispatch:

Ensure proper packing of goods as per company standards to prevent damage during transportation.
Use appropriate packing materials and methods based on product requirements.
Label and document packed items accurately before dispatch.
Coordinate with the logistics team for timely shipment and delivery.

2. Stock Maintenance & Inventory Control:

Maintain accurate records of stock levels, ensuring all entries are updated in the inventory system.
Conduct routine stock checks and physical verification to prevent discrepancies.
Organize stock properly in designated locations for easy access and retrieval.
Monitor and report low stock levels to avoid shortages.

3. Quality & Safety Compliance:

Adhere to company packing and warehouse safety standards.
Ensure all stock is handled with care to maintain product quality.
Follow workplace hygiene and safety protocols.

4. Coordination & Reporting:

Work closely with procurement, production, and dispatch teams to align stock movements.
Maintain daily logs of packing, dispatch, and stock updates.
Report damaged or defective goods to the concerned department for further action.

CNC operator - SI-0325-14   Openings: 5

Harish consultancy   Chennai   ₹15000 - ₹18000

Work Experience: 0-2 Years

CNC Operator/Programmer to set up, operate, and program CNC machines for precision manufacturing. Responsibilities include reading engineering drawings, selecting tools, setting machine parameters, operating CNC lathe/milling machines, and ensuring quality control. Candidates should have experience with G-code/M-code programming, knowledge of CAM software (preferred), and expertise in measuring instruments and GD&T. A Diploma/ITI in Mechanical Engineering with relevant industry experience is required.

VTL Operator - SI-0325-13   Openings: 3

Harish consultancy   Tamil Nadu   ₹15000 - ₹25000

Work Experience: 3-4 Years

VTL (Vertical Turning Lathe) Operator/Programmer to handle machine setup, programming, and operation. Responsibilities include reading engineering drawings, selecting tools, setting machine parameters, operating VTL machines, and ensuring high-precision machining. Candidates should have experience with CNC/VTL operations, knowledge of G-code/M-code, and proficiency in quality inspection using measuring instruments. A Diploma/ITI in Mechanical Engineering with relevant experience in machining is required.

VMC operator CUM SETTER - SI-0325-9   Openings: 5

Harish consultancy   Chennai   ₹15000 - ₹25000

Work Experience: 3-5 Years

VMC Operator/Programmer to handle machine setup, programming, and operation using G-code/M-code. Responsibilities include interpreting engineering drawings, performing tool selection, ensuring precision machining, and conducting quality checks. Candidates should have experience with CNC/VMC operations, knowledge of CAM software (preferred), and expertise in GD&T and tooling. A diploma/ITI in Mechanical Engineering with relevant experience is required.

Stores Manager - HA-0324-7   Openings: 2

Harish consultancy   Chennai   ₹25,000 TH - ₹30,000 TH

Work Experience: 5-8 Years

The Stores Manager is responsible for overseeing the efficient management and operation of the stores department. This includes managing inventory levels, ensuring timely material availability, maintaining accurate records, and optimizing the storage and distribution of materials. The role also involves implementing effective stock control procedures to prevent overstocking, stockouts, and discrepancies, while ensuring compliance with safety and quality standards.
? Key Responsibilities:
1. Inventory Management:

   Oversee and manage the entire inventory cycle, including receiving, storing, and issuing of raw materials, consumables, and finished goods.

   Maintain accurate and up-to-date stock records using ERP or inventory management systems.

   Ensure optimal stock levels by monitoring minimum and maximum thresholds.

   Conduct regular physical stock audits and reconcile with system records.

   Identify and address stock variances or discrepancies promptly.

2. Store Operations & Organization:

   Ensure proper labeling, tagging, and organization of materials for easy identification and retrieval.

   Optimize the layout of the store for efficient space utilization.

   Ensure the safe and secure storage of goods, preventing damage, theft, or contamination.

   Implement and monitor FIFO (First In, First Out) and LIFO (Last In, First Out) methods as applicable.

3. Procurement Coordination:

   Collaborate with the purchase department to ensure timely procurement of materials.

   Verify the quality and quantity of incoming materials against purchase orders.

   Report any damaged, defective, or short-supplied materials to the procurement team.

   Ensure proper documentation and filing of GRNs (Goods Receipt Notes) and delivery challans.

4. Record Keeping & Documentation:

   Maintain accurate records of inward and outward material movements.

   Prepare daily, weekly, and monthly inventory reports.

   Ensure proper documentation for stock adjustments, transfers, and disposals.

   Handle documentation for audits, inspections, and compliance purposes.

5. Team Management:

   Supervise and guide store personnel, including storekeepers and assistants.

   Assign tasks and ensure adherence to store policies and procedures.

   Provide training on safety protocols, material handling, and record-keeping practices.

6. Compliance & Safety:

   Ensure adherence to company policies, safety standards, and quality regulations.

   Comply with statutory and legal requirements related to storage and inventory.

   Implement proper safety measures for handling hazardous or flammable materials.

   Ensure proper disposal of expired or obsolete inventory items.

? Key Skills & Competencies:

   Strong knowledge of inventory management systems and ERP software.

   Excellent organizational and problem-solving skills.

   Attention to detail and accuracy in record-keeping.

   Ability to manage multiple tasks and prioritize effectively.

   Strong leadership and team management abilities.

   Good communication and coordination skills.

? Qualifications & Experience:

   Bachelor’s degree or diploma in Logistics, Supply Chain Management, Business Administration, or a related field.

   5+ years of experience in store management, preferably in a manufacturing environment.

   Proficiency in inventory management software and MS Office.

   Familiarity with ISO standards and audit procedures is an added advantage.

? KPIs (Key Performance Indicators):
   Accuracy of inventory records.
   Reduction in stock variances and wastage.
   Timely material availability and minimal stockouts.
   Efficient space utilization and stock turnover.
   Compliance with safety and audit standards.

? Work Environment:
   Primarily based in the warehouse or stores area of the manufacturing plant.
   May require occasional interaction with the procurement, production, and quality control teams.

Service Technician - Electrical - HA-0324-6   Openings: 10

Harish consultancy   Chennai   ₹20,000 TH - ₹30,000 TH

Work Experience: 1-2 Years

1. Diploma in Electrical Engineering - Freshers or 1-3 years of Experience.


2. Commissioning.


3. Servicing


4. Call Reports / Service Reports.


5. Willing to Travel.

Service Technician - Mechanical - HA-0324-5   Openings: 10

Harish consultancy   Chennai   ₹20,000 TH - ₹30,000 TH

Work Experience: 1-2 Years

1. Diploma in Mechanical Engineering - Freshers or 1-3 years of Experience.


2. Commissioning.


3. Servicing.


4. Call Reports / Service Reports.


5. Willing to Travel.

CNC Programmer cum Operators - HA-0324-4   Openings: 2

Harish consultancy   Chennai   ₹20,000 TH - ₹36,000 TH

Work Experience: 2-3 Years

Skills: CNC Programming

1. Programming


2. Tool Setting


3. Cleaning of the Machine.

Assembly Fitters - HA-0324-3   Openings: 10

Harish consultancy   ₹15,000 TH - ₹25,000 TH

Work Experience: 1-2 Years

Diploma (Mech.) or ITI
 


1. Assembly & Fitting of Components:
Assemble mechanical, hydraulic, and pneumatic components as per engineering drawings.
Drilling, tapping, grinding, and welding are performed as required for fitting.
Ensure proper alignment, bolting, and securing of components to maintain structural integrity.


2. Reading & Interpreting Technical Drawings:
Read and work from engineering drawings, blueprints, and specifications.
Follow standard assembly procedures to achieve accurate and efficient assembly.


3. Quality Inspection & Testing:
Conduct functional tests on assembled units to check for defects and ensure proper operation.
Use measuring instruments (vernier calipers, micrometers, gauges) to verify accuracy and alignment.
Identify and rectify assembly defects to maintain quality standards.


4. Machine & Tool Handling:
Operate power tools, hand tools, and precision instruments for assembly.
Ensure proper maintenance and safe usage of tools and equipment.


5. Troubleshooting & Rectification:
Identify and fix assembly errors, misalignments, and operational defects.
Work with engineers and supervisors to resolve complex fitting issues.


6. Safety & Compliance:
Follow all workplace safety guidelines and use Personal Protective Equipment (PPE).
Ensure adherence to ISO, ASME, OSHA, and other industry standards.
Maintain a clean and organized workshop and assembly area.

Mig Welder - HA-0324-2   Openings: 12

Harish consultancy   Chennai   ₹15,000 TH - ₹25,000 TH

Work Experience: 3-5 Years

Skills: Mig Welding

Strong Knowledge in Mig Welding